How to Ride A Dirt Bike for Beginners!

As a kid, I was a big motorcycle fan. My brother and I would wake up at 4:30a.m., get our chores done, eat breakfast and catch our school bus by 6a.m.. But even though we got home from school so late, it still wasn't enough time to ride our dirt bikes before dark. We were always eager to ride, but the lack of daylight made it hard at times.

Read More: Best 4 Stroke Dirt Bike for Trail Riding

Living in an area that received abundant amounts of snowfall meant that our riding season was cut short even more. Since our dirt bike training consisted mainly of watching MotoGP races on TV, we learned how to ride dirt bikes by trial and error mostly, or what we thought was right.

Even though we had some lessons from a trainer at the track, I wish we would have been more educated on how to ride a dirt bike as beginners before heading out on our own. We were lucky not to have hurt ourselves because of it.

If you're an adult who has newly purchased a dirt bike, or if you're an adult who is still riding around on your parents' dirt bike, I've got some tips for you.

I hope this article can give all of you aspiring riders everything that might have been missed when learning how to ride a dirt motorcycle.

Just remember that everyone makes mistakes and has never ridden a dirt bike before, it's important to be properly trained in order to avoid serious injury. It's also a great idea if you want to get your kids involved with dirt bike riding; which is an excellent way for them to learn discipline and responsibility early on in their lives.

From the moment you decide that you want to start dirt bike riding, there are some precautions that you should take in order to protect yourself.

First, check out your local laws concerning off-road dirt bikes. Make sure that they are street legal. All the equipment you need to ride a dirt bike on public roads is required by law, including a license plate, headlamp, tail lamp and reflectors.

Make sure that you have all the necessary safety gear. And if you want to take your dirt bike riding a step further, I recommend investing in some dirt bike body armor for off-road riding.

It's important that you wear a helmet and full leathers. The last thing you want is to go out there and hurt yourself because of a lack of safety equipment.

In this article, I'll be showing you how to ride a dirt bike by giving you a step-by-step explanation on how to operate a two stroke engine and how it delivers power to the rear tire.

I'll also give you some tips on how not to fall off your motorcycle during a sharp turn or when shifting gears.

So, let's ride!

STEP 1: Basic controls and how to shift gears when learning how to ride a dirt bike for beginners.

When you're just starting out, attempting to drive your dirt bike in higher gear ranges will only slow you down and burn up all your engine power. It's best that beginner riders keep their dirt bike in a lower gear range until you become more familiar with your dirt bike and its power. This will prevent the motor from overheating and bogging down on you when it's needed most.

My brother and I went through all sorts of bikes before we got our first two stroke dirt bike, but nothing bogs them down like shifting into higher gear ranges when you're new to dirt bike riding.

When learning how to ride a dirt bike for beginners, it's important that you become familiar with your clutch lever and throttle control. Beginner riders tend to confuse the controls which makes operating the motorcycle trickier than it should be. So here's how they work:

Your left hand controls the clutch and your right hand controls the throttle.

The easiest way to become familiar with these two controls is to start out by shifting into first gear. Pull the clutch all the way up and twist your wrist as if you're turning a doorknob clockwise until it disengages, then rock your foot slightly off to the left side of your dirt bike to find first gear.

Now, twist your throttle all the way open until you get the momentum needed to move forward. When you get used to this, you can shift into higher gears because it's okay for beginners to start off in a lower gear range (first or second) when learning how to ride a dirt bike. You should only switch into higher gear ranges once you feel comfortable shifting.

If you're just starting out, it's best to stay away from the brake because too much stopping power on loose terrain will cause your rear tire to spin out, which is never good for a beginner rider!

STEP 2: How to operate your dirt bike with your left hand controls.

When you're ready to learn how to ride a dirt bike, it's best that you familiarize yourself with your left hand controls as well as the throttle and clutch. Learning how to operate both your clutch and throttle levers during different situations is important when learning how to ride a dirt bike because they are the most used parts of the motorcycle.

Let's start out with the clutch lever. Pull it towards you to disengage your engine from your rear wheel, and push it away from you to send power to the rear wheel. Make sure that when engaging and disengaging your clutch, you squeeze and release slowly because too much force on either end will damage your clutch pack. Now let's move onto the throttle. Twist it counter-clockwise to slow down and clockwise to speed up. Under heavy use, dirt bike throttles have a tendency of sticking so twist your throttle slowly and steadily until you get used to how much power you need in order for your engine to go faster or slower.

STEP 3: Tips on how to ride a dirt bike.

Now that you know how to operate your dirt bike, there are some vital tips on how to keep yourself safe while learning how to ride a dirt bike. If you're just getting started off road biking and everything is feeling new and scary, take it slow and don't be afraid to fall!

There isn't a single person who's ever started off riding a dirt bike and didn't fall at least once. Everyone falls when they start learning how to ride, even the professionals! Falling is actually pretty safe as long as you do it on grass or some other soft surface.

It goes without saying that you should always wear a helmet while riding your dirt bike, but even the pros don't escape without a stitch or two. Riding dirt bikes can be dangerous, so always be prepared for an unexpected patch of sand or rock that may cause you to wipe out unexpectedly.

How to Unseize An Engine That Ran out of Oil?

Imagine you're on your way home from work along the freeway when suddenly your car begins to make odd noises. You attempt to direct your car to the shoulder but it won't cooperate. Then you realize you're running out of oil and caused the engine to stop. Unprepared for the situation could create more problems.

Must Read: Best Penetrating Oil for Seized Engine

There are methods to keep your engine from crashing because of a lack of oil. By checking your vehicle regularly for indications of low oil levels, you can steer clear of this kind of scenario completely. However, if this does happen be calm and follow the steps below to resolve the issue before it gets any worse.

1. First, check your oil level. There is no need to climb under the auto's hood to do this. Simply pull over and locate an appropriate spot in which you can park your vehicle without causing obstruction to traffic. After you've pulled your car over and opened the hood of your vehicle and examine the level of oil by taking a look at the dipstick. There are some vehicles that come with an indicator on the dashboard. If the level is within the limits, you'll be able to move with the following step. If not, make sure to add oil and test the result in a couple of minutes.

2. Make sure you check your other fluids. Before you step under the underside of your car be sure to check the other fluid levels, including coolant, brake fluid and windshield-washer fluid by hand through each reservoir. This way you're more likely to prevent any future issues that your vehicle might be experiencing.

3. Unlock the hood of your vehicle and take the time to look around where you will find the battery of your vehicle. Take care to remove the wires that connect to it, either by loosening them using an awl or by removing the bolts entirely, depending on where they're located.

4. Unscrew the bolts When the wires are taken off there are bolts in your engine, based on the way it was designed. Unscrew the bolts using either a ratchet or wrench by counter-turning the bolts clockwise to release them. It is important to take care not to twist the bolt's head, therefore you must be careful when working with them.

5. Do not loosen, but don't take them off. Once you have removed the bolts and loosen them about 3/4 of a turn , so that it is easier to remove them completely once you're ready to pull your engine. Even though the bolts aren't completely removed, you are able to begin the process of removing the engine.

6. Unseat-- To free the engine, you'll require a long pry bar, which is between the length of 24 and 32 inches. It is recommended to purchase one made of iron since it's got enough strength to handle this type of task. Find your vehicle and locate an area in which you can put the pry bar prior to putting it beneath the engine. You can then ask a second person to help you lift the bar and gradually move it away from under your engine. This will loosen the engine to allow you to easily take it off later.

7. Remove The bolts if your car is equipped with a front-wheel drive, you're able to take the bolts off the transmission. After that, you'll be able to slide out of underneath the frame of your car. If your vehicle is rear-wheel drive or all-wheel drive is the case, you must be aware of the amount of space around the engine , as the exhaust system can hinder your progress. In this situation it is possible to remove the bolts on your headers or exhaust manifolds and then take them off the engine block. The manifold or the header will fall out without difficulty after the removal.

8. Remove-- Once you have succeeded in getting rid of both your transmission and exhaust system, you're able to proceed to remove the bolts that secure your brackets that mount your engine to the frame of your car. You can then lift the engine and then hold it in place while another person takes the bolts from the engine block mounts, so that you are able to slide off the other parts.

9. Prepare- In order to avoid experiencing this issue again You must replenish the level of oil in your engine. You should also make sure that you add fresh fluids to the entire engine before returning everything to where it is. It is essential to ensure that these fluids are at their correct levels prior to restarting your vehicle.

10. Start-- Once you have done this, you can start the engine until it will be running for a short period of time without making sudden movements. After that, turn off the engine and examine the oil level again to verify if it's within the safe limits as stated in your car's manual.

11. Once you have done this, you'll be able to return to the engine compartment and test every bolt for their tightness by turning them with the wrench counter-clockwise, just to make sure they're still secure.

12. Clean-up-- Get rid of any grime or dirt which may have accumulated under the engine or on the mounts.

13. Reassemble the car- In some instances you may need to remove additional components from your vehicle in order to dispose of all the equipment and tools you required for this task. After that, you must do a an inspection of the bolts and ensure that everything is in order.

14. Test drive- After taking everything back and re-testing your vehicle again to ensure that there aren't any leaks, or loose components that may require repair. Also, you should look for any unusual sound or vibrations prior to going forward and driving around your neighborhood.